https://mobirise.com/

SMART AUTOMATIC WATER LEVEL CONTROLLER

স্মার্ট অটোমেটিক ওয়াটার লেভেল কন্ট্রোলার

MODEL NO. WLC09(AUTO ON, AUTO OFF)

(For Submersible Pump Used to lift water from under ground to overhead tank)


Offer Price: Rs 7,000/-(1 year warranty)

Introduction

This water pump controller is fully automatic along with manual mode. This model is suitable for submersible pump (installed in underrground) used to lift water in overhead tank. When the water level of overhead tank fall below a specified level (middle sensor) then the Automatic Water Level Controller turns ON the pump. When water level of overhead tank reaches to in upper level (top sensor) then Automatic Water Level Controller turn off the pump.


    This automatic water level controller is a useful device for homes, hospitals, industries, etc. This product saves water, electricity and time and helps in preventing the overflow of water from the overhead tank, enabling you to efficiently manage your water resource and prevent any wastage.

Photo Gallery
Screenshot of Automatic Water Level Controller (Model No.-WLC09)
Corbon Sensors
Carbon Sensors placed in Overhead Tank
Dimension of Carbon Sensor
Side View of Main Unit
3 Core of PVC Wire
Carbon Sensors with PVC cap
Carbon Sensors separated from PVC cap
Salent Features

1. Saves electricity (energy), water, money, times, No man power required to ON or OFF the pump. 

2. Avoids seepage of water from roofs & walls due to overflowing tanks.

3. Easy installation-Do not require to change the existing wiring.

4. Low maintenance

5. Compact and elegant design

6. Fully automatic

7. Increases pump life

8. Shock proof sensors work on law of conductivity. There is no current passes through sensors. 

9. High quality carbon sensors are used. These are pure carbon, no impurities, free from oxidation, ABS plastic cover cap provided. Carbon pin, molded within Polypropylene, long life, do not require frequent cleaning or replacement.

10. Automatic Water Level controller Consume very little energy, ideal for continuous operation.

11. This automatic water level controller is microcontroller(AVR) based. Due to this is more reliable.

12. This controller has a buzzer which generates buzzer sound jusr before starting or stop time of pump to draw the attention of user. This is for kind information. In addition of this, controller generates continuous beep sound untill the pump remains ON. It also generates another type of sound when pump check dryrun condition during starting time.

13. This automatic water level indicator has dry run indicator. After switching ON the pump the controller checks the water level for 5 minutes. If  OL sensor detects water level within this time then pump goes on running further. Otherwise the controller stops the pump and the dry run indicator LED glows.

14. This controller has delay circuits which delay the main power for few seconds. This feature protects the internal circuit and also pump from surge voltage during the comeback of main power.

15. Due to any reason if the automatic water level controller do not work then user can operate the pump manually. This feature very useful and not require emergency servicing. To use the pump in manual mode user should keep the AUTO/MANUAL switch in MANUAL position to ON the pump and to OFF the pump user should keep this switch in OFF position.

16. The controller has over voltage and under voltage indicator LED. When the mains voltage becomes below 180V then under voltage LED glows. On the other hand if mains voltage becomes above 240V then over voltage LED glows. 


16. Contain an emergency ON/OFF switch. This features is more important. Suppose your automatic water level controller is in AUTO mode but you want to ON the pump manually now. To do this you can keep the AUTO/MANUAL switch in MANUAL position. In this case the pump will not be switched OFF automatically. You have to switch OFF the pump manually also. This automatic water level controller provides an emergency ON/OFF switch. Using this push button switch user can either ON of OFF the pump as his/her requirement when the AUTO/MANUAL switch is in AUTO position. If you want to ON the pump then press this switch once. To OFF the pump you can press this switch again otherwise the pump will be switched OFF automatically when the tank is filled with water. This feature is useful in sometimes like during summer at morning underground water level remain much than the noon or after noon. You can ON the pump by pressing this switch. The pump will be switched OFF automatically or you can switch OFF the pump manually by pressing again.

17. Comparatively low price

18. Product warrant is 18 month

19. After the end warranty period if the automatic water level controller becomes defective then we shall repair it with minimum cost.


1. এটি বিদ্যুত বাঁচায়, সময় বাঁচায়, জলের অপচয় রক্ষা করে এবং অর্থও বাঁচায়।
2. পাম্প অন বা অফ করার কোনো হেভেক থাকে না।এটি পুরোপুরি অটোমেটিক এবং চালানানোর জন্যে কোনো ম্যান পাওয়ার লাগে না। যখন জলের লেভেল নির্দিষ্ট পয়েন্ট থেকে কমে যায় তখন পাম্প অটোমেটিকিলি অন হয়ে যায় এবং যখন ট্যঙ্কে জল ভর্তি হয়ে যায় তখন পাম্প অটোমেটিকিলি বন্ধ হয়ে যায়।
3. এটি জলের ওভারফ্লো বন্ধ করে। জলের ওভারফ্লো হওয়ার কারণে বাড়ির ছাদ এবং দেওয়াল ক্ষতিগ্রস্ত হওয়ার সম্ভবনা থাকে।
4. এটি পাম্পের লাইফটাইম বৃদ্ধি করে।
5. এই Automatic Water Level Controller এর সঙ্গে যে Sensor দেওয়া হয় তা Carbon এর তেরী। তারফলে অনেকদিন ব্যবহার করা সত্তেও Carbon Sensor এর উপর কোনো আয়রনের আস্তরন পড়ে না। তারফলে ঘন ঘন মেন্টেনেন্স এর প্রয়োজন পড়ে না।
6. এই Automatic Water Level Controller টি চায়না প্রোডাক্ট নয়। এটি মাইক্রোকন্ট্রোলার চিপ দিয়ে তেরী এবং প্রোগ্রামিং করা। তারফলে এটি খারাপ হওয়ার সম্ভবনা কম। হাই কোয়ালিটি এপোক্সি গ্লাস প্রিন্টেট সার্কিট বোর্ড ব্যবহার করা হয়। তাই খারাপ হলেও অতি সহজেই রিপিয়ারিং করা যায়। এতে সার্কিট বোর্ড নষ্ট হয় না।
7. ওভার ভোল্টেজ এবং আন্ডার ভোল্টেজ প্রোটেকশনের ব্যবস্থা আছে। তারফলে ভোল্টেজ ১৮০ ভোল্ট থেকে কমে গেলে অথবা ২৪০ ভোল্ট থেকে বেড়ে গেলে পাম্প অটোমেটিকিলি বন্ধ হয়ে যায়।
8. বিভিন্ন টাইপের বাজার সাউন্ড দিয়ে থাকে।যেমন পাম্প অন বা অফ হওয়ার সময় ৬ সেকেন্ডের জন্যে একটি বীপ সাউন্ড দিয়ে থাকে।
9. ড্রাই রান প্রোটেকশনের ব্যবস্থা আছে। পাম্প অন হয়ার পর যদি ৪ মিনিটের মধ্যে সেন্সর জল ডিটেকশন করতে না পারে তাহলে পাম্প অটোমেটিকিলি বন্ধ হয়ে যাবে।


Connection Diagram
Working

This Automatic Water Level Controller has two modes of operation.

1. Automatic Mode: In automatic mode of operation, the pump is started or stopped automatically. When the water level of overhead tank falls below the specified level i.e. below the middle sensor, the automatic water level controller turns on the pump. When water level of overhead tank reaches at top sensor then automatic water level controller turn off the pump. In this mode, the the START and STOP buttons of submersible starter panel are not work.

 2. Manual Mode: In manual mode the pump is operated manually as usual. In this mode, the pump is operated by START and STOP buttons of submersible starter panel. In manual mode the internal circuit of automatic water level controller remains in switched off condition and no electric power consumes.


N.B.: Once the pump is switched ON manually it will contiue untill it is switched off manually. Thus do not forget to switch off the pump when it is running in mamual mode.

Specification

1. Dimension: 6”x8"X2”

2. Input Voltage: Single Phase, 230V, 50Hz

3. Capacity: 1 HP or above

4. Cabinet: Plastic

5. Weight: 600 gram

6. Mounting type: Wall mount

7. No of input terminals: 03 Nos [Earth, Neutral and Phase]

8. No of output terminals: 07 [C1, C2, N, V, 3 nos terminals for sensors (G, OL, OH)]

9. Type of sensors: Carbon cantact type sensor

10. Number of sensor: 03 Nos [03 Nos for Overhead tank {Reference(G), OL and OH} ]

11. Indicators: Power On, OL, OH, Empty for overhead tank and Dry Run

12. Mode Selection Switch: Auto/Manual toggle switch

13. Push to On Switch: One push to ON switch for Manual ON Manaual On or Manual ON Auto OFF

14. Current flows through the sensor and water: few nano ampers (Less than 1 micro ampers)

Function of Controls and Indicators in Front Panel

1. AUTO/MAMUAL Switch: This is the mode selection switch. In AUTO mode the pump runs automatically when the water level of overhead tank falls below the specified level (i.e. below the middle sensor) and stops automatically when the water level of overhead tank reaches at top sensor or water level of reserver tank falls below the speicified level i.e. middle sensor. In MANUAL mode the pump is started or stopped manually.

2. DRY RUN LED: When the pump is started then automatic water level controller check the water level of overhead tank. If the controller is able to detect the water at middle sensor within 2 minutes then the controller allows the pump to run further otherwise it stops the pump immediately and energizes the  dry run led.

3. MOTOR ON LED: Glow this LED when motor is ON.

4. POWER LED: Glow this LED when mains power is applied. When mains power is applied then POWER LED emits red light  indicating that the system is not ready. After 3 seconds the POWER LED emits green light indicating that the system is ready for operation.

5. AUTO LED: Glows this LED when mode selection switch is in AUTO position.

6. MANUAL LED: Glows this LED when mode selection switch is in MANUAL position.

7. Water level indicators for Overhead Tank: There are three LEDs for indicating water levels in overhead tank. 1. Full:- Glows this LED when the overhead tank is full with water. 2. MODERATE:- Glows this LED when the water level is between top and middle sensors of overhead tank. 3. EMPTY:- Glows this LED when water level falls below the middle sensor of overhead tank.

8. Emergency ON/OFF switch: When the mode selection switch is in AUTO position, the user can ON or OFF the pump manually. This features is suitable for sometimes. Suppose your automatic water level controller is in AUTO mode and pump is in OFF condition but you want to switch ON the pump now. To do this you can keep the AUTO/MANUAL switch in MANUAL position. In this case the pump will not be switched OFF automatically. You have to switch OFF the pump manually also. This automatic water level controller provides an emergency ON/OFF switch. Using this push button switch user can either ON of OFF the pump as his/her requirement when the AUTO/MANUAL switch is in AUTO position. If you want to ON the pump then press this switch once. To switch OFF the pump you can press this switch again otherwise the pump will be switched OFF automatically when the tank is filled with water. This feature is useful in sometimes like during summer at morning underground water level remain much than the noon or after noon. You can switch ON the pump by pressing this switch. The pump will be switched OFF automatically or you can switch OFF the pump manually by pressing again.

Precaution

1. Install this Automatic Water Level Controller by a electrictician who good knowledge and good skill.

2. Before installation of automatic water level controller study and understand the wiring of starter panel of submersible pump.

3. After installation of automatic water level controller verify again the connection before energize the circuit.

4. Do not keep the mode selection switch in OFF position( i.e. middle position). Ensure that AUTO led glows when automatic water level controller is in AUTO position. Similarly  ensure that MANUAL led glows when automatic water level controller is in MANUAL position. During manual operation if the switch is not connected properly then you will not able to operate the pump start and stop buttons of starter panel.

5. Do not change from MANUAL mode to AUTO mode or AUTO mode to MANUAL mode when the pump is running.

Change the mode of operation only when the pump is not running. When the pump is running in manual mode and if you change to AUTO mode in this time, then pump will not stop automatically.

Warranty

1 year from the date of purchase

N.B: No warranty due over voltage or over current or lightning

Price

Rs 7,000.00 per item

(a) Automatomatic Water Level Controller(Model No. WLC09) - 1 No

(b) Carbon sensors - 3 Nos


N.B: Installation charge Rs 499/- and 3 core PVC wire @Rs23/- per meter extra

Enquiry
Contact Details

ELECTRONICS PROJECT HUB PVT. LTD.

KOLKATA, WEST BENGAL

Website: www.electronicsprojecthub.com

Email ID: electronicsprojecthub@rediffmail.com

                 electronicsprojecthub@gmail.com         

Mobile: 9073315892